LORA SHIELD V2.2

The Lora is based on RN2483 an uart RF module. LoraBer PI V 2.2 is an extension board for RaspBerry Pi. It is an Open Hardware Design. It has two functionalities: a dual band Lora module and an on board Real Time clock powered by a 12 mm battery (Battery CR1216 is not included). In the following figure is shown the Board Top View. Microchip’s RN2483 Low-Power Long Range LoRa Technology Transceiver module provides an easy to use, low-power solution for long range wireless data transmission. The advanced command interface offers rapid time to market. The RN2483 module complies with the LoRaWAN Class A protocol specifications. It integrates RF, a baseband controller, command Application Programming Interface (API) processor, making it acomplete long range solution.

RF Performance declared on datasheet:

• Low-Power Long Range Transceiver Operating in the 433 MHz and 868 MHz Frequency Bands
• High Receiver Sensitivity: Down to -146 dBm
• TX Power: Adjustable up to +14 dBm high Efficiency PA
• FSK, GFSK, and LoRa Technology Modulation
• IIP3 = -11 dBm
• Up to 15 km Coverage at Suburban and up to 5 km Coverage at Urban Area

Country of origin is Italy

Customs charge code / HS CODE 85049005